Home/Egyptian Journal of Petroleum/Article Record
Peer-Reviewed Article March 31, 2016

Enhancement of yield point at high pressure high temperature wells by using polymer nanocomposites based on ZnO & CaCO 3 nanoparticles

Are you an author of this work?Link to your sovereign AfriScholar profile
Published in: Egyptian Journal of Petroleum
Publisher: Egyptian Petroleum Research Institute • Egypt • 1110-0621 • 2090-2468
DOI: https://doi.org/10.1016/j.ejpe.2016.03.002

Abstract

Zinc oxide nanoparticles (ZnO-NPs) and modified calcium carbonate (nano-CaCO 3 ) nanoparticles were successfully prepared and added to polystyrene-butadiene rubber copolymer (PSBR) matrix to prepare PSBR nanocomposites. The prepared nanomaterials (ZnO-NPs & nano-CaCO 3 ) were characterized using scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffraction (XRD). Furthermore, the prepared polymer nanocomposites and oil base mud were used for drilling in high pressure high temperature (HPHT) wells. The consequence of using polymer nanocomposites based on different loading of ZnO-NPs and nano-CaCO 3 on the rheological properties of oil base mud was evaluated and enhanced the yield point at high pressure high temperature wells (HPHT). The using of the polymer with different percentage from (0.5) in all percent the obtained results is very promising; this means that the increase of polymer is reasonable for the increase of apparent viscosity, plastic viscosity and yield point at high temperature. Correspondingly, polymer nanocomposites displayed rise of apparent viscosity, plastic viscosity, and yield point, decreased in fluid loss and increased in electrical stability at high pressure high temperature wells.

Download Full Text PDFView at PublisherCrossref RecordCrossref XML

Verified Citation Velocity

Recorded scholarly citations in African and international peer-reviewed literature

84
Total Citations

Citations are continuously tracked and harvested across continental OJS endpoints and OpenAlex feeds.