Home/Journal of Metallurgy/Article Record
Peer-Reviewed Article October 9, 2016

Metallurgical and Machinability Characteristics of Wrought and Selective Laser Melted Ti-6Al-4V

Are you an author of this work?Link to your sovereign AfriScholar profile
Published in: Journal of Metallurgy
Publisher: Hindawi Publishing Corporation • Egypt • 1687-9465
DOI: https://doi.org/10.1155/2016/7407918

Abstract

This research work presents a machinability study between wrought grade titanium and selective laser melted (SLM) titanium Ti-6Al-4V in a face turning operation, machined at cutting speeds between 60 and 180 m/min. Machinability characteristics such as tool wear, cutting forces, and machined surface quality were investigated. Coating delamination, adhesion, abrasion, attrition, and chipping wear mechanisms were dominant during machining of SLM Ti-6Al-4V. Maximum flank wear was found higher in machining SLM Ti-6Al-4V compared to wrought Ti-6Al-4V at all speeds. It was also found that high machining speeds lead to catastrophic failure of the cutting tool during machining of SLM Ti-6Al-4V. Cutting force was higher in machining SLM Ti-6Al-4V as compared to wrought Ti-6Al-4V for all cutting speeds due to its higher strength and hardness. Surface finish improved with the cutting speed despite the high tool wear observed at high machining speeds. Overall, machinability of SLM Ti-6Al-4V was found poor as compared to the wrought alloy.

Download Full Text PDFView at PublisherCrossref RecordCrossref XML

Verified Citation Velocity

Recorded scholarly citations in African and international peer-reviewed literature

34
Total Citations

Citations are continuously tracked and harvested across continental OJS endpoints and OpenAlex feeds.