Home/Bulletin of the Chemical Society of Ethiopia/Article Record
Peer-Reviewed Article April 23, 2020

Hexavalent chromium reduction from real electroplating wastewater by chemical precipitation

Are you an author of this work?Link to your sovereign AfriScholar profile
Published in: Bulletin of the Chemical Society of Ethiopia
Publisher: Chemical Society of Ethiopia • Ethiopia • 1011-3924 • 1726-801X
DOI: https://doi.org/10.4314/bcse.v34i1.6

Abstract

The immense use of chromium in the electroplating process leads to the discharge of hexavalent chromium in its effluent. Since Cr(VI) is highly toxic, its exposure poses an acute risk of health. On the contrary, Cr(III) which is naturally occurring, is much less toxic than Cr(VI). Therefore the easiest way to deal with Cr(VI) is to reduce it into its trivalent form. Exhaustive chemical analysis was done to reduce Cr(VI) to Cr(III) by using sodium metabisulfite (Na2S2O5) and ferrous sulfate (FeSO4). And after the reduction process, precipitating agents such as (Ca(OH)2), (NaOH) and a combination of the two were used to precipitate Cr(III) as hydroxides. Various parameters were varied and optimized. It was observed that the % Cr(VI) reduction increased from 88% to 99.97% when the dosage of sodium metabisulfite increased from 40 mg/L to 100 mg/L at a pH of 2. The maximum removal of 98.2% was achieved by using the combination of Ca(OH)2 + NaOH at a pH of 9. Bull. Chem. Soc. Ethiop. 2020, 34(1), 67-74. DOI: https://dx.doi.org/10.4314/bcse.v34i1.6

Download Full Text PDFCrossref RecordCrossref XML

Verified Citation Velocity

Recorded scholarly citations in African and international peer-reviewed literature

0
Total Citations

Citations are continuously tracked and harvested across continental OJS endpoints and OpenAlex feeds.