Home/Egyptian Journal of Petroleum/Article Record
Peer-Reviewed Article April 9, 2016

Treatment of drilling fluids wastewater by electrocoagulation

Are you an author of this work?Link to your sovereign AfriScholar profile
Published in: Egyptian Journal of Petroleum
Publisher: Egyptian Petroleum Research Institute • Egypt • 1110-0621 • 2090-2468
DOI: https://doi.org/10.1016/j.ejpe.2016.03.005

Abstract

Electrocoagulation has been successfully used to treat a variety of industrial wastewaters. The goal is to form flocks of metal hydroxides within the effluent to be cleaned by electro-dissolution of soluble anodes. The present work deals with the removal of petroleum organic matter such as diesel from drilling fluids wastewater by the electrocoagulation technique using a direct current (DC) electrolytic cell. The cell is consisted of a rectangular Plexiglass container of dimension 12 * 12 * 15 cm equipped with varied number of parallel horizontal meshed Aluminum anodes (9 * 9 cm) and 115.2 cm2 effective area, stainless steel (9 * 9 cm) cathode. The electrodes were connected to a digit DC power supply (40 V) with a multi-range ammeter connected in series and voltmeter connected in parallel with the cell. The percentage of COD removal was studied under different conditions by varying the following parameters: (1) electrolysis time, from 5 to 45 min, (2) current density, from 0.008 to 0.034 A/cm2, (3) number of parallel horizontal meshed Al anodes, (4) electrolyte concentration. The new anode design of electrocoagulation cell permits high efficiencies with lower energy consumption in comparison with the other cell design used in previous studies.

Download Full Text PDFView at PublisherCrossref RecordCrossref XML

Verified Citation Velocity

Recorded scholarly citations in African and international peer-reviewed literature

71
Total Citations

Citations are continuously tracked and harvested across continental OJS endpoints and OpenAlex feeds.