Home/Bulletin of the National Research Centre/Bulletin of the National Research Center/Article Record
Peer-Reviewed Article June 17, 2019

Analysis of polyhydroxybutrate and bioplastic production from microalgae

Are you an author of this work?Link to your sovereign AfriScholar profile
Published in: Bulletin of the National Research Centre/Bulletin of the National Research Center
Publisher: Springer Science+Business Media • Egypt • 1110-0591
DOI: https://doi.org/10.1186/s42269-019-0135-5

Abstract

Algae manufacture a diversity of base materials that can be used for bioplastics assembly. The most essential compounds are carbohydrates and hydrocarbons. Polyhydroxybutyrate (PHB) is a polymer belonging to the polyester class that is of interest as bio-derived and biodegradable plastics. In this study, three microalgal strains in addition to two microalgal biomass collected from high-rate algal ponds (HRAP) were used to detect their ability to produce polyhydroxybutrate for bioplastic production. The results showed that among the selected strains, Microcystis aeruginosa has the highest polyhydroxybutrate concentration (0.49 ± 0.5 mg mL −1 ). However, the biomass collected from the high-rate algal pond dominated with Microcystis sp. showed a higher concentration (0.7 ± 0.6 mg mL −1 ). The biomass collected from the high-rate algal pond dominated with Microcystis sp. was used for producing bioplastic since it has the highest concentration of PHB. Referring to plasticizing capacity, elongation at break (%) for algal biomass was 530% which was higher than that detected in blank which was 307%. So, it was obvious that the algal bioplastic has good plasticizing capacity.

Download Full Text PDFView at PublisherCrossref RecordCrossref XML

Verified Citation Velocity

Recorded scholarly citations in African and international peer-reviewed literature

110
Total Citations

Citations are continuously tracked and harvested across continental OJS endpoints and OpenAlex feeds.