Home/Journal of Radiation Research and Applied Sciences/Article Record
Peer-Reviewed Article November 18, 2016

Ammonium sulfate preparation from phosphogypsum waste

Are you an author of this work?Link to your sovereign AfriScholar profile
Published in: Journal of Radiation Research and Applied Sciences
Publisher: Elsevier BV • Egypt • 1687-8507
DOI: https://doi.org/10.1016/j.jrras.2016.11.001

Abstract

The Egyptian phosphogypsum waste is treated using sulfuric acid prior the ammonium sulfate production. The relevant factors that would affect the removal efficiencies of some impurities are studied. The optimum conditions of the treatment are 8 M sulfuric acid solution and 1/4 solid/liquid ratio for 30 min contact time at 80 °C. Moreover, the optimum conditions of the ammonium sulfate preparation are 10 g of the suspended impure or purified phosphogypsum in 40 ml of 3% ammonium sulfate solution (as initiator), 1/4 solid/liquid ratio at pH7 at an addition of an excess ammonium carbonate, and 150 rpm stirring speed for 4.0 h contact time at 55 °C as well as the 5 mg of barium chloride is added to remove the radium in the ammonium sulfate product. Finally, the ammonium sulfate is crystallized and the chemical analysis of the product shows 20% nitrogen and 23.6% sulfur. Therefore, the purity of the obtained ammonium sulfate is 95% from the purified phosphogypsum.

Download Full Text PDFView at PublisherCrossref RecordCrossref XML

Verified Citation Velocity

Recorded scholarly citations in African and international peer-reviewed literature

89
Total Citations

Citations are continuously tracked and harvested across continental OJS endpoints and OpenAlex feeds.