Home/Applied Journal of Environmental Engineering Science/Article Record
Peer-Reviewed Article September 11, 2017

Biosorption Studies of Fe (III), Cu (II), and Co (II) from Aqueous Solutions by Olive Leaves Powder

Are you an author of this work?Link to your sovereign AfriScholar profile
Published in: Applied Journal of Environmental Engineering Science
Publisher: University Ibn Zohr • Morocco • 2509-2065
DOI: https://doi.org/10.48422/imist.prsm/ajees-v3i4.9806

Abstract

Using batch adsorption process, adsorption of Fe(III), Co(II), and Cu(II) ions from aqueous solutions onto olive leaves powder has been studied. Various parameters; which affect the biosorption process, have been optimized. These parameters include pH of the solution, initial metal ion concentration, biosorbent dose, and contact time. The optimum pH values for the biosorption of metal ions were as follows: 6.0-6.5 for Fe and 5.0-5.5 for Cu and Co. Maximum biosorption capacity has been obtained at 0.1 g biosorbent dose for the three elements. Langmuir and Freundlich isotherm models have been used to analyze the experimental biosorption data. The high correlation coefficient values (R2 > 0.9) showed that the Langmuir and Freundlich isotherm models were fitted well with our systems. The maximum adsorption capacity values calculated from the Langmuir isotherm were 31.45 mg/g, 57.14 mg/g, and 16.29 mg/g for Fe(III), Cu(II) and Co(II), respectively, which have been determined at optimum experimental conditions. Olive leaves powder could be considered as an inexpensive, high efficient, and environmentally friendly biosorbent for the removal of Fe, Cu, Co from aqueous media.

Download Full Text PDFView at PublisherCrossref RecordCrossref XML

Verified Citation Velocity

Recorded scholarly citations in African and international peer-reviewed literature

9
Total Citations

Citations are continuously tracked and harvested across continental OJS endpoints and OpenAlex feeds.