Home/ERJ: Engineering Research Journal/Article Record
Peer-Reviewed Article September 30, 2009

PHOTOVOLTAIC MAXIMUM POWER POINT TRACKING USING SEPIC CONVERTER

Are you an author of this work?Link to your sovereign AfriScholar profile
Published in: ERJ: Engineering Research Journal
Publisher: Faculty of Engineering, Menoufia University • Egypt • 1110-1180 • 3009-6944
DOI: https://doi.org/10.21608/erjm.2009.69528

Abstract

In this paper a maximum power point hacking (MPPT) system based on the single ended primary inductor converter (SEPIC) and hill-climbimg approach is introduced. 'SEPIC converter is a comprehensive buck-boost converter and has minimum ripple content in the input current that suitable for PV application. The proposed MPPT system is designed and components of SEPIC converter are sized and selected. The conholler is so fast and no fluctuation around the MPP is introduced. A current and voltage of the PV array are sensed and a pulse width modulation (PWM) signal is produced from the controller to conhol the duty ratio of the converter. The simulation results show that three tests are carried out on the system; a suddenly insolation level increasing, decreasing, and load resistance variation. The controller establishes robustness for all the three cases and the maximum power available fiom the PV array are transferred to the load irrespective of load or environmental condition variations.

Download Full Text PDFView at PublisherCrossref RecordCrossref XML

Verified Citation Velocity

Recorded scholarly citations in African and international peer-reviewed literature

23
Total Citations

Citations are continuously tracked and harvested across continental OJS endpoints and OpenAlex feeds.